[1970-Jan-01 00:00:50.830823]: Log level: info
[1970-Jan-01 00:00:51.256178]: Initializing component: PrinterPanelController
[1970-Jan-01 00:00:51.462452]: Initializing component: PrinterPanelGui
[1970-Jan-01 00:01:09.980897]: Setting language to en
[1970-Jan-01 00:01:10.247175]: Loaded font :/resources/Antenna-Black.otf
[1970-Jan-01 00:01:10.249402]: Loaded families Antenna
[1970-Jan-01 00:01:10.404015]: Loaded font :/resources/Antenna-Bold.otf
[1970-Jan-01 00:01:10.405903]: Loaded families Antenna
[1970-Jan-01 00:01:10.545700]: Loaded font :/resources/Antenna-Regular.otf
[1970-Jan-01 00:01:10.547590]: Loaded families Antenna
[1970-Jan-01 00:01:10.668945]: Loaded font :/resources/Antenna-Medium.otf
[1970-Jan-01 00:01:10.681156]: Loaded families Antenna
[1970-Jan-01 00:01:20.206457]: (UDEV Monitor): Successfully created udev
[1970-Jan-01 00:01:31.943182]: DeauthAccountsPanel::setAccountNum(0) stage: 0
[1970-Jan-01 00:01:33.281589]: Language de requests antenna which is always ok
[1970-Jan-01 00:01:33.283390]: Language en requests antenna which is always ok
[1970-Jan-01 00:01:33.285124]: Language es requests antenna which is always ok
[1970-Jan-01 00:01:33.286944]: Language es_la requests antenna which is always ok
[1970-Jan-01 00:01:33.288849]: Language fr requests antenna which is always ok
[1970-Jan-01 00:01:33.290847]: Language it requests antenna which is always ok
[1970-Jan-01 00:01:33.292649]: Looking for fonts NotoSansCJKjp*
[1970-Jan-01 00:01:33.490527]: Found font type NotoSansCJKjp-Black
[1970-Jan-01 00:01:33.492397]: Found font type NotoSansCJKjp-Bold
[1970-Jan-01 00:01:33.494332]: Found font type NotoSansCJKjp-Medium
[1970-Jan-01 00:01:33.496158]: Found font type NotoSansCJKjp-Regular
[1970-Jan-01 00:01:33.498658]: Found font type NotoSansCJKjp-Black
[1970-Jan-01 00:01:33.500704]: Found font type NotoSansCJKjp-Bold
[1970-Jan-01 00:01:33.502523]: Found font type NotoSansCJKjp-Medium
[1970-Jan-01 00:01:33.504331]: Found font type NotoSansCJKjp-Regular
[1970-Jan-01 00:01:33.506322]: All font types found for ja
[1970-Jan-01 00:01:33.516325]: Looking for fonts NotoSansCJKkr*
[1970-Jan-01 00:01:33.655667]: Found font type NotoSansCJKkr-Black
[1970-Jan-01 00:01:33.657549]: Found font type NotoSansCJKkr-Bold
[1970-Jan-01 00:01:33.660313]: Found font type NotoSansCJKkr-Medium
[1970-Jan-01 00:01:33.662178]: Found font type NotoSansCJKkr-Regular
[1970-Jan-01 00:01:33.664038]: Found font type NotoSansCJKkr-Black
[1970-Jan-01 00:01:33.666014]: Found font type NotoSansCJKkr-Bold
[1970-Jan-01 00:01:33.667859]: Found font type NotoSansCJKkr-Medium
[1970-Jan-01 00:01:33.669693]: Found font type NotoSansCJKkr-Regular
[1970-Jan-01 00:01:33.671962]: All font types found for ko
[1970-Jan-01 00:01:33.673989]: Language pr requests antenna which is always ok
[1970-Jan-01 00:01:33.675796]: Looking for fonts NotoSansCJKsc*
[1970-Jan-01 00:01:33.813747]: Found font type NotoSansCJKsc-Black
[1970-Jan-01 00:01:33.815760]: Found font type NotoSansCJKsc-Bold
[1970-Jan-01 00:01:33.817622]: Found font type NotoSansCJKsc-Medium
[1970-Jan-01 00:01:33.820400]: Found font type NotoSansCJKsc-Regular
[1970-Jan-01 00:01:33.822275]: Found font type NotoSansCJKsc-Black
[1970-Jan-01 00:01:33.824186]: Found font type NotoSansCJKsc-Bold
[1970-Jan-01 00:01:33.826188]: Found font type NotoSansCJKsc-Medium
[1970-Jan-01 00:01:33.828036]: Found font type NotoSansCJKsc-Regular
[1970-Jan-01 00:01:33.829922]: All font types found for zh
[1970-Jan-01 00:01:33.833876]: Available langs:  de en es es_la fr it ja ko pr zh
[1970-Jan-01 00:01:34.382388]: loading status icon height 40 width 14
[1970-Jan-01 00:01:34.385228]: Loaded initial menu item
[1970-Jan-01 00:01:34.520345]: Done loading menu items
[1970-Jan-01 00:01:55.682782]: BasePanel not calling onEntry because not current: Get Started
[1970-Jan-01 00:01:58.482860]: Starting component: PrinterPanelController
[1970-Jan-01 00:01:58.486578]: Starting component: PrinterPanelGui
[1970-Jan-01 00:01:58.518007]: Connecting via socket: /tmp/kaiten.socket
[1970-Jan-01 00:01:58.642194]: Registering printerpanel RPC method: allow_unknown_firmware
[1970-Jan-01 00:01:58.673117]: Registering printerpanel RPC method: authorize_user
[1970-Jan-01 00:01:58.675278]: Registering printerpanel RPC method: error_acknowledged
[1970-Jan-01 00:01:58.676998]: Registering printerpanel RPC method: error_notification
[1970-Jan-01 00:01:58.678823]: Registering printerpanel RPC method: extruder_change
[1970-Jan-01 00:01:58.700779]: Registering printerpanel RPC method: firware_updates_info_change
[1970-Jan-01 00:01:58.702494]: Registering printerpanel RPC method: font_notification
[1970-Jan-01 00:01:58.704325]: Registering printerpanel RPC method: network_state_change
[1970-Jan-01 00:01:58.706005]: Registering printerpanel RPC method: print_file_valid
[1970-Jan-01 00:01:58.707759]: Registering printerpanel RPC method: request_user_input
[1970-Jan-01 00:01:58.709428]: Registering printerpanel RPC method: reset_to_factory
[1970-Jan-01 00:01:58.731588]: Registering printerpanel RPC method: start_diagnostics
[1970-Jan-01 00:01:58.733292]: Registering printerpanel RPC method: state_notification
[1970-Jan-01 00:01:58.735105]: Registering printerpanel RPC method: system_notification
[1970-Jan-01 00:01:58.750705]: Connected!

[1970-Jan-01 00:02:05.951216]: DeauthAccountsPanel::setAccountNum(0) stage: 0
[1970-Jan-01 00:02:06.357953]: Connected Kaiten has version 2.6.2.734
[1970-Jan-01 00:02:06.386099]: DeauthAccountsPanel::setAccountNum(0) stage: 0
[1970-Jan-01 00:02:06.579518]: Move to main screen in splashdone
[1970-Jan-01 00:02:06.808541]: BotModel::stateNotification
[1970-Jan-01 19:35:50.164799]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:35:50.268145]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:35:50.364965]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:35:50.372804]: (UDEV Monitor): Transitioned to state: 1
[1970-Jan-01 19:35:51.164981]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:35:51.264763]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:35:54.264844]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:35:55.964966]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:35:56.033651]: (UDEV Monitor): Transitioned to state: 2
[1970-Jan-01 19:37:34.970909]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:37:35.070709]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:37:35.079567]: (UDEV Monitor): Transitioned to state: 0
[1970-Jan-01 19:37:35.170672]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:37:35.270723]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:37:35.370690]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:37:35.470666]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:37:35.570764]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:37:45.322799]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:37:45.422791]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:37:45.522791]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:37:45.529763]: (UDEV Monitor): Transitioned to state: 1
[1970-Jan-01 19:37:46.323127]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:37:46.424430]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:37:49.382988]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:37:50.540906]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:37:50.556587]: (UDEV Monitor): Transitioned to state: 2
[1970-Jan-01 19:37:58.465420]: BotModel::stateNotification
[1970-Jan-01 19:37:58.954492]: BotModel::stateNotification
[1970-Jan-01 19:37:59.050955]: BotModel::stateNotification
[1970-Jan-01 19:37:59.127230]: BotModel::stateNotification
[1970-Jan-01 19:38:02.753668]: DeauthAccountsPanel::setAccountNum(1) stage: 0
[1970-Jan-01 19:39:29.748905]: DeauthAccountsPanel::setAccountNum(1) stage: 0
[1970-Jan-01 19:40:03.097438]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:40:03.200710]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:40:03.207985]: (UDEV Monitor): Transitioned to state: 0
[1970-Jan-01 19:40:03.297395]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:40:03.397447]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:40:03.497412]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:40:03.597400]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 19:40:03.697384]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:30:19.319776]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:30:19.419759]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:30:19.519725]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:30:19.527025]: (UDEV Monitor): Transitioned to state: 1
[1970-Jan-01 22:30:20.319737]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:30:20.458872]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:30:23.221768]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:30:24.421459]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:30:24.446264]: (UDEV Monitor): Transitioned to state: 2
[1970-Jan-01 22:33:36.211805]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:33:36.471136]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:33:36.478814]: (UDEV Monitor): Transitioned to state: 0
[1970-Jan-01 22:33:36.571533]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:33:36.677172]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:33:36.771656]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:33:36.871545]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:33:36.971756]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:33:38.571544]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:33:38.671507]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:33:38.771587]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:33:38.778563]: (UDEV Monitor): Transitioned to state: 1
[1970-Jan-01 22:33:39.571581]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:33:39.671714]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:33:42.671597]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:33:44.071991]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:33:44.108453]: (UDEV Monitor): Transitioned to state: 2
[1970-Jan-01 22:34:58.292862]: BotModel::stateNotification
[1970-Jan-01 22:34:58.383697]: built from filename
[1970-Jan-01 22:34:58.404735]: qtinything couldn't unzip metadata
[1970-Jan-01 22:34:58.767653]: PrintProcess state change: 1
[1970-Jan-01 22:34:58.986306]: goToPreviousScreen: screen BuildScreennot in history!
[1970-Jan-01 22:35:00.060581]: print monitor shown
[1970-Jan-01 22:35:00.102702]: BotModel::stateNotification
[1970-Jan-01 22:35:00.184590]: PrintProcess state change: 26
[1970-Jan-01 22:35:02.270768]: BotModel::stateNotification
[1970-Jan-01 22:35:02.364939]: PrintProcess state change: 15
[1970-Jan-01 22:35:02.555794]: print monitor shown
[1970-Jan-01 22:35:02.926074]: BotModel::stateNotification
[1970-Jan-01 22:35:03.006376]: PrintProcess state change: 29
[1970-Jan-01 22:35:03.035502]: print monitor shown
[1970-Jan-01 22:35:04.905047]: BotModel::stateNotification
[1970-Jan-01 22:35:04.999696]: PrintProcess state change: 31
[1970-Jan-01 22:35:05.018638]: print monitor shown
[1970-Jan-01 22:35:05.031978]: PrintProcess state change: 0
[1970-Jan-01 22:35:05.271674]: BotModel::stateNotification
[1970-Jan-01 22:35:56.066426]: BotModel::stateNotification
[1970-Jan-01 22:35:56.152502]: built from filename
[1970-Jan-01 22:35:56.154826]: qtinything couldn't unzip metadata
[1970-Jan-01 22:35:56.483588]: PrintProcess state change: 1
[1970-Jan-01 22:35:56.767400]: print monitor shown
[1970-Jan-01 22:35:56.781217]: BotModel::stateNotification
[1970-Jan-01 22:35:56.860857]: PrintProcess state change: 26
[1970-Jan-01 22:35:58.284903]: BotModel::stateNotification
[1970-Jan-01 22:35:58.357513]: PrintProcess state change: 15
[1970-Jan-01 22:35:58.425902]: print monitor shown
[1970-Jan-01 22:36:00.621824]: BotModel::stateNotification
[1970-Jan-01 22:36:00.709711]: PrintProcess state change: 29
[1970-Jan-01 22:36:00.728680]: print monitor shown
[1970-Jan-01 22:36:02.888523]: BotModel::stateNotification
[1970-Jan-01 22:36:02.991382]: PrintProcess state change: 31
[1970-Jan-01 22:36:02.999761]: print monitor shown
[1970-Jan-01 22:36:03.022942]: PrintProcess state change: 0
[1970-Jan-01 22:36:03.142121]: BotModel::stateNotification
[1970-Jan-01 22:37:19.264623]: print monitor shown
[1970-Jan-01 22:37:19.273911]: print monitor shown
[1970-Jan-01 22:37:19.282412]: print monitor shown
[1970-Jan-01 22:37:19.341116]: print monitor shown
[1970-Jan-01 22:37:19.449237]: print monitor shown
[1970-Jan-01 22:37:19.464431]: print monitor shown
[1970-Jan-01 22:37:19.483465]: print monitor shown
[1970-Jan-01 22:37:19.521139]: print monitor shown
[1970-Jan-01 22:37:27.482148]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:37:27.681093]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:37:27.688076]: (UDEV Monitor): Transitioned to state: 0
[1970-Jan-01 22:37:27.704919]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:37:27.796847]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:37:27.875011]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:37:27.974892]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 22:37:28.074829]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 23:02:09.768540]: BotModel::stateNotification
[1970-Jan-01 23:02:09.860599]: built from filename
[1970-Jan-01 23:02:09.862548]: qtinything couldn't unzip metadata
[1970-Jan-01 23:02:10.744127]: PrintProcess state change: 1
[1970-Jan-01 23:02:10.937860]: goToPreviousScreen: screen BuildScreennot in history!
[1970-Jan-01 23:02:11.016976]: print monitor shown
[1970-Jan-01 23:02:11.768852]: BotModel::stateNotification
[1970-Jan-01 23:02:11.874181]: PrintProcess state change: 26
[1970-Jan-01 23:02:15.214520]: BotModel::stateNotification
[1970-Jan-01 23:02:15.302899]: PrintProcess state change: 15
[1970-Jan-01 23:02:15.362360]: print monitor shown
[1970-Jan-01 23:02:15.910750]: BotModel::stateNotification
[1970-Jan-01 23:02:15.989350]: PrintProcess state change: 29
[1970-Jan-01 23:02:16.020990]: print monitor shown
[1970-Jan-01 23:02:17.946412]: BotModel::stateNotification
[1970-Jan-01 23:02:18.039532]: PrintProcess state change: 31
[1970-Jan-01 23:02:18.059103]: print monitor shown
[1970-Jan-01 23:02:18.072264]: PrintProcess state change: 0
[1970-Jan-01 23:02:18.227649]: BotModel::stateNotification
[1970-Jan-01 23:09:09.381163]: BotModel::stateNotification
[1970-Jan-01 23:09:09.468805]: built from filename
[1970-Jan-01 23:09:09.481273]: qtinything couldn't unzip metadata
[1970-Jan-01 23:09:10.604907]: PrintProcess state change: 1
[1970-Jan-01 23:09:10.895844]: print monitor shown
[1970-Jan-01 23:09:11.666402]: BotModel::stateNotification
[1970-Jan-01 23:09:11.747475]: PrintProcess state change: 26
[1970-Jan-01 23:09:12.768021]: BotModel::stateNotification
[1970-Jan-01 23:09:12.860337]: PrintProcess state change: 15
[1970-Jan-01 23:09:12.915068]: print monitor shown
[1970-Jan-01 23:09:15.158206]: BotModel::stateNotification
[1970-Jan-01 23:09:15.243690]: PrintProcess state change: 29
[1970-Jan-01 23:09:15.263372]: print monitor shown
[1970-Jan-01 23:09:16.932409]: BotModel::stateNotification
[1970-Jan-01 23:09:17.029366]: PrintProcess state change: 31
[1970-Jan-01 23:09:17.046786]: print monitor shown
[1970-Jan-01 23:09:17.049500]: PrintProcess state change: 0
[1970-Jan-01 23:09:17.258135]: BotModel::stateNotification
[1970-Jan-01 23:13:01.679030]: BotModel::stateNotification
[1970-Jan-01 23:13:01.771447]: built from filename
[1970-Jan-01 23:13:01.773432]: qtinything couldn't unzip metadata
[1970-Jan-01 23:13:02.670846]: PrintProcess state change: 1
[1970-Jan-01 23:13:02.922900]: print monitor shown
[1970-Jan-01 23:13:03.703486]: BotModel::stateNotification
[1970-Jan-01 23:13:03.783996]: PrintProcess state change: 26
[1970-Jan-01 23:13:07.943453]: BotModel::stateNotification
[1970-Jan-01 23:13:08.026086]: PrintProcess state change: 6
[1970-Jan-01 23:13:08.105357]: print monitor shown
[1970-Jan-01 23:13:14.881219]: PrintFileValid::invoke
[1970-Jan-01 23:13:14.883793]: BotModel::printFileValidNotification
[1970-Jan-01 23:13:14.898978]: built from valid signal
[1970-Jan-01 23:13:33.726742]: BotModel::stateNotification
[1970-Jan-01 23:13:33.829784]: PrintProcess state change: 9
[1970-Jan-01 23:13:33.923372]: print monitor shown
[1970-Jan-01 23:14:04.149780]: BotModel::stateNotification
[1970-Jan-01 23:14:04.245755]: PrintProcess state change: 7
[1970-Jan-01 23:14:04.312290]: print monitor shown
[1970-Jan-01 23:16:28.149759]: BotModel::stateNotification
[1970-Jan-01 23:16:28.254055]: PrintProcess state change: 13
[1970-Jan-01 23:16:28.294852]: print monitor shown
[1970-Jan-01 23:16:45.449325]: BotModel::stateNotification
[1970-Jan-01 23:16:45.527776]: PrintProcess state change: 17
[1970-Jan-01 23:16:45.671567]: print monitor shown
[1970-Jan-01 23:16:53.582311]: BotModel::stateNotification
[1970-Jan-01 23:16:53.667451]: PrintProcess state change: 19
[1970-Jan-01 23:16:53.687116]: print monitor shown
[1970-Jan-01 23:16:53.966907]: BotModel::stateNotification
[1970-Jan-01 23:16:54.063873]: PrintProcess state change: 11
[1970-Jan-01 23:16:54.167869]: print monitor shown
[1970-Jan-01 23:16:55.542686]: BotModel::stateNotification
[1970-Jan-01 23:16:55.628512]: PrintProcess state change: 19
[1970-Jan-01 23:16:55.692979]: print monitor shown
[1970-Jan-01 23:17:00.791784]: BotModel::stateNotification
[1970-Jan-01 23:17:00.878748]: PrintProcess state change: 13
[1970-Jan-01 23:17:00.915753]: print monitor shown
[1970-Jan-01 23:17:12.221758]: BotModel::stateNotification
[1970-Jan-01 23:17:12.320350]: PrintProcess state change: 17
[1970-Jan-01 23:17:12.396413]: print monitor shown
[1970-Jan-01 23:17:19.283620]: BotModel::stateNotification
[1970-Jan-01 23:17:19.368213]: PrintProcess state change: 19
[1970-Jan-01 23:17:19.388398]: print monitor shown
[1970-Jan-01 23:17:19.623782]: BotModel::stateNotification
[1970-Jan-01 23:17:19.711338]: PrintProcess state change: 11
[1970-Jan-01 23:17:19.814358]: print monitor shown
[1970-Jan-01 23:17:32.631791]: BotModel::stateNotification
[1970-Jan-01 23:17:32.708308]: PrintProcess state change: 19
[1970-Jan-01 23:17:32.755009]: print monitor shown
[1970-Jan-01 23:17:34.262410]: BotModel::stateNotification
[1970-Jan-01 23:17:34.345302]: PrintProcess state change: 13
[1970-Jan-01 23:17:34.366679]: print monitor shown
[1970-Jan-01 23:17:46.442037]: BotModel::stateNotification
[1970-Jan-01 23:17:46.518075]: PrintProcess state change: 17
[1970-Jan-01 23:17:46.588018]: print monitor shown
[1970-Jan-01 23:17:53.841277]: BotModel::stateNotification
[1970-Jan-01 23:17:53.917158]: PrintProcess state change: 19
[1970-Jan-01 23:17:53.958593]: print monitor shown
[1970-Jan-01 23:17:54.024405]: BotModel::stateNotification
[1970-Jan-01 23:17:54.121415]: PrintProcess state change: 11
[1970-Jan-01 23:17:54.220620]: print monitor shown
[1970-Jan-01 23:17:55.469982]: BotModel::stateNotification
[1970-Jan-01 23:17:55.557625]: PrintProcess state change: 19
[1970-Jan-01 23:17:55.611063]: print monitor shown
[1970-Jan-01 23:18:00.032890]: BotModel::stateNotification
[1970-Jan-01 23:18:00.126813]: PrintProcess state change: 13
[1970-Jan-01 23:18:00.147673]: print monitor shown
[1970-Jan-01 23:18:12.303153]: BotModel::stateNotification
[1970-Jan-01 23:18:12.392354]: Step change error: 81
[1970-Jan-01 23:18:12.394249]: PrintProcess state change: 16
[1970-Jan-01 23:18:12.465197]: print monitor shown
[1970-Jan-01 23:18:13.426323]: Setting error code
[1970-Jan-01 23:18:18.376920]: BotModel::stateNotification
[1970-Jan-01 23:18:18.462269]: Step change error: 81
[1970-Jan-01 23:18:18.464572]: PrintProcess state change: 18
[1970-Jan-01 23:19:25.120866]: BotModel::stateNotification
[1970-Jan-01 23:19:25.204092]: PrintProcess state change: 19
[1970-Jan-01 23:19:25.225908]: print monitor shown
[1970-Jan-01 23:19:25.627572]: BotModel::stateNotification
[1970-Jan-01 23:19:25.756122]: Step change error: 80
[1970-Jan-01 23:19:25.758319]: PrintProcess state change: 16
[1970-Jan-01 23:19:25.779543]: print monitor shown
[1970-Jan-01 23:19:26.706518]: Setting error code
[1970-Jan-01 23:19:29.165681]: BotModel::stateNotification
[1970-Jan-01 23:19:29.263403]: Step change error: 80
[1970-Jan-01 23:19:29.265405]: PrintProcess state change: 18
[1970-Jan-01 23:26:33.954290]: BotModel::stateNotification
[1970-Jan-01 23:26:34.003377]: PrintProcess state change: 19
[1970-Jan-01 23:26:34.014108]: print monitor shown
[1970-Jan-01 23:26:36.452403]: BotModel::stateNotification
[1970-Jan-01 23:26:36.524656]: Step change error: 80
[1970-Jan-01 23:26:36.526563]: PrintProcess state change: 16
[1970-Jan-01 23:26:36.544399]: print monitor shown
[1970-Jan-01 23:26:37.459909]: Setting error code
[1970-Jan-01 23:26:39.939944]: BotModel::stateNotification
[1970-Jan-01 23:26:40.019179]: Step change error: 80
[1970-Jan-01 23:26:40.021433]: PrintProcess state change: 18
[1970-Jan-01 23:26:49.015199]: BotModel::stateNotification
[1970-Jan-01 23:26:49.096515]: PrintProcess state change: 19
[1970-Jan-01 23:26:49.118809]: print monitor shown
[1970-Jan-01 23:26:51.148195]: BotModel::stateNotification
[1970-Jan-01 23:26:51.356870]: Step change error: 80
[1970-Jan-01 23:26:51.358770]: PrintProcess state change: 16
[1970-Jan-01 23:26:51.389304]: print monitor shown
[1970-Jan-01 23:26:52.397372]: Setting error code
[1970-Jan-01 23:26:54.925212]: BotModel::stateNotification
[1970-Jan-01 23:26:55.016899]: Step change error: 80
[1970-Jan-01 23:26:55.019137]: PrintProcess state change: 18
[1970-Jan-01 23:26:59.840389]: BotModel::stateNotification
[1970-Jan-01 23:26:59.882080]: PrintProcess state change: 19
[1970-Jan-01 23:26:59.892410]: print monitor shown
[1970-Jan-01 23:27:02.014151]: BotModel::stateNotification
[1970-Jan-01 23:27:02.211489]: Step change error: 80
[1970-Jan-01 23:27:02.213517]: PrintProcess state change: 16
[1970-Jan-01 23:27:02.239533]: print monitor shown
[1970-Jan-01 23:27:03.303145]: Setting error code
[1970-Jan-01 23:27:05.796429]: BotModel::stateNotification
[1970-Jan-01 23:27:05.845932]: Step change error: 80
[1970-Jan-01 23:27:05.848009]: PrintProcess state change: 18
[1970-Jan-01 23:27:07.526765]: print monitor shown
[1970-Jan-01 23:27:09.855454]: BotModel::stateNotification
[1970-Jan-01 23:27:09.947662]: Step change error: 80
[1970-Jan-01 23:27:09.949476]: PrintProcess state change: 15
[1970-Jan-01 23:27:10.040286]: print monitor shown
[1970-Jan-01 23:27:12.206809]: BotModel::stateNotification
[1970-Jan-01 23:27:12.292732]: Step change error: 80
[1970-Jan-01 23:27:12.294575]: PrintProcess state change: 29
[1970-Jan-01 23:27:12.323657]: print monitor shown
[1970-Jan-01 23:27:23.884846]: BotModel::stateNotification
[1970-Jan-01 23:27:23.963037]: Step change error: 80
[1970-Jan-01 23:27:23.964912]: PrintProcess state change: 31
[1970-Jan-01 23:27:23.973990]: print monitor shown
[1970-Jan-01 23:27:23.976889]: PrintProcess state change: 0
[1970-Jan-01 23:27:24.047322]: BotModel::stateNotification
[1970-Jan-01 23:27:32.133050]: print monitor shown
[1970-Jan-01 23:27:32.150474]: print monitor shown
[1970-Jan-01 23:27:32.159520]: print monitor shown
[1970-Jan-01 23:27:32.169863]: print monitor shown
[1970-Jan-01 23:27:32.179940]: print monitor shown
[1970-Jan-01 23:27:32.190262]: print monitor shown
[1970-Jan-01 23:27:32.201908]: print monitor shown
[1970-Jan-01 23:27:32.219325]: print monitor shown
[1970-Jan-01 23:27:32.228917]: print monitor shown
[1970-Jan-01 23:27:32.239031]: print monitor shown
[1970-Jan-01 23:27:32.248561]: print monitor shown
[1970-Jan-01 23:27:32.257996]: print monitor shown
[1970-Jan-01 23:27:32.271518]: print monitor shown
[1970-Jan-01 23:27:32.280831]: print monitor shown
[1970-Jan-01 23:27:32.290264]: print monitor shown
[1970-Jan-01 23:27:32.299523]: print monitor shown
[1970-Jan-01 23:27:32.316995]: print monitor shown
[1970-Jan-01 23:27:32.326512]: print monitor shown
[1970-Jan-01 23:27:32.337315]: print monitor shown
[1970-Jan-01 23:27:32.346975]: print monitor shown
[1970-Jan-01 23:27:32.356336]: print monitor shown
[1970-Jan-01 23:27:32.367459]: print monitor shown
[1970-Jan-01 23:27:32.376993]: print monitor shown
[1970-Jan-01 23:27:32.401014]: print monitor shown
[1970-Jan-01 23:27:32.414464]: print monitor shown
[1970-Jan-01 23:27:32.424290]: print monitor shown
[1970-Jan-01 23:27:32.435771]: print monitor shown
[1970-Jan-01 23:27:32.445292]: print monitor shown
[1970-Jan-01 23:27:32.456578]: print monitor shown
[1970-Jan-01 23:27:32.466532]: print monitor shown
[1970-Jan-01 23:27:32.481688]: print monitor shown
[1970-Jan-01 23:27:32.544548]: print monitor shown
[1970-Jan-01 23:27:32.627691]: print monitor shown
[1970-Jan-01 23:27:32.637074]: print monitor shown
[1970-Jan-01 23:27:32.664757]: print monitor shown
[1970-Jan-01 23:27:32.704047]: print monitor shown
[1970-Jan-01 23:27:32.787697]: print monitor shown
[1970-Jan-01 23:27:32.797068]: print monitor shown
[1970-Jan-01 23:27:32.818292]: print monitor shown
[1970-Jan-01 23:27:32.876801]: print monitor shown
[1970-Jan-01 23:27:39.360811]: BotModel::stateNotification
[1970-Jan-01 23:27:39.453149]: load standard step change: running
[1970-Jan-01 23:27:40.735330]: BotModel::stateNotification
[1970-Jan-01 23:27:40.809896]: load standard step change: preheating
[1970-Jan-01 23:30:14.388984]: BotModel::stateNotification
[1970-Jan-01 23:30:14.492322]: load standard step change: extrusion
[1970-Jan-01 23:31:07.282250]: BotModel::stateNotification
[1970-Jan-01 23:31:07.363401]: load standard step change: cleaning_up
[1970-Jan-01 23:31:07.840624]: BotModel::stateNotification
[1970-Jan-01 23:31:07.925800]: load standard step change: done
[1970-Jan-01 23:31:07.927837]: load filament completed
[1970-Jan-01 23:31:08.110630]: BotModel::stateNotification
[1970-Jan-01 23:31:21.552720]: BotModel::stateNotification
[1970-Jan-01 23:31:21.625723]: load standard step change: running
[1970-Jan-01 23:31:23.887782]: BotModel::stateNotification
[1970-Jan-01 23:31:23.930550]: load standard step change: preheating
[1970-Jan-01 23:31:24.394956]: BotModel::stateNotification
[1970-Jan-01 23:31:24.476435]: load standard step change: extrusion
[1970-Jan-01 23:32:16.855377]: BotModel::stateNotification
[1970-Jan-01 23:32:16.954750]: load standard step change: cleaning_up
[1970-Jan-01 23:32:17.015305]: BotModel::stateNotification
[1970-Jan-01 23:32:17.095955]: load standard step change: done
[1970-Jan-01 23:32:17.098157]: load filament completed
[1970-Jan-01 23:32:17.376859]: BotModel::stateNotification
[1970-Jan-01 23:32:27.637129]: BotModel::stateNotification
[1970-Jan-01 23:32:27.925817]: BotModel::stateNotification
[1970-Jan-01 23:32:28.036141]: BotModel::stateNotification
[1970-Jan-01 23:32:28.390845]: BotModel::stateNotification
[1970-Jan-01 23:32:51.161601]: BotModel::stateNotification
[1970-Jan-01 23:32:51.229330]: built from filename
[1970-Jan-01 23:32:51.241655]: qtinything couldn't unzip metadata
[1970-Jan-01 23:32:51.586710]: PrintProcess state change: 1
[1970-Jan-01 23:32:51.842638]: goToPreviousScreen: screen BuildScreennot in history!
[1970-Jan-01 23:32:51.966488]: print monitor shown
[1970-Jan-01 23:32:51.980301]: BotModel::stateNotification
[1970-Jan-01 23:32:52.062708]: PrintProcess state change: 26
[1970-Jan-01 23:32:57.032022]: BotModel::stateNotification
[1970-Jan-01 23:32:57.089524]: PrintProcess state change: 8
[1970-Jan-01 23:32:57.144838]: print monitor shown
[1970-Jan-01 23:33:02.147047]: PrintFileValid::invoke
[1970-Jan-01 23:33:02.174856]: BotModel::printFileValidNotification
[1970-Jan-01 23:33:02.185125]: built from valid signal
[1970-Jan-01 23:33:22.796664]: BotModel::stateNotification
[1970-Jan-01 23:33:22.892658]: PrintProcess state change: 9
[1970-Jan-01 23:33:22.982916]: print monitor shown
[1970-Jan-01 23:33:53.232560]: BotModel::stateNotification
[1970-Jan-01 23:33:53.322962]: PrintProcess state change: 7
[1970-Jan-01 23:33:53.403456]: print monitor shown
[1970-Jan-01 23:35:13.153589]: BotModel::stateNotification
[1970-Jan-01 23:35:14.340810]: PrintProcess state change: 13
[1970-Jan-01 23:35:14.360950]: print monitor shown
[1970-Jan-01 23:35:30.558770]: BotModel::stateNotification
[1970-Jan-01 23:35:30.665252]: PrintProcess state change: 17
[1970-Jan-01 23:35:30.722801]: print monitor shown
[1970-Jan-01 23:35:37.634213]: BotModel::stateNotification
[1970-Jan-01 23:35:37.719993]: PrintProcess state change: 19
[1970-Jan-01 23:35:37.744993]: print monitor shown
[1970-Jan-01 23:35:37.905555]: BotModel::stateNotification
[1970-Jan-01 23:35:37.991628]: PrintProcess state change: 11
[1970-Jan-01 23:35:38.098998]: print monitor shown
[1970-Jan-01 23:35:39.363920]: BotModel::stateNotification
[1970-Jan-01 23:35:39.460758]: PrintProcess state change: 19
[1970-Jan-01 23:35:39.500286]: print monitor shown
[1970-Jan-01 23:35:44.505385]: BotModel::stateNotification
[1970-Jan-01 23:35:44.628127]: PrintProcess state change: 13
[1970-Jan-01 23:35:44.666157]: print monitor shown
[1970-Jan-01 23:35:57.161974]: BotModel::stateNotification
[1970-Jan-01 23:35:57.244475]: PrintProcess state change: 17
[1970-Jan-01 23:35:57.315399]: print monitor shown
[1970-Jan-01 23:36:05.865900]: BotModel::stateNotification
[1970-Jan-01 23:36:05.954079]: PrintProcess state change: 19
[1970-Jan-01 23:36:05.973484]: print monitor shown
[1970-Jan-01 23:36:06.127732]: BotModel::stateNotification
[1970-Jan-01 23:36:06.208470]: PrintProcess state change: 11
[1970-Jan-01 23:36:06.318706]: print monitor shown
[1970-Jan-01 23:36:11.476499]: BotModel::stateNotification
[1970-Jan-01 23:36:11.568506]: Step change error: 80
[1970-Jan-01 23:36:11.580763]: PrintProcess state change: 16
[1970-Jan-01 23:36:11.607634]: print monitor shown
[1970-Jan-01 23:36:12.493323]: Setting error code
[1970-Jan-01 23:36:16.310623]: BotModel::stateNotification
[1970-Jan-01 23:36:16.391047]: Step change error: 80
[1970-Jan-01 23:36:16.393044]: PrintProcess state change: 18
[1970-Jan-01 23:40:54.189861]: print monitor shown
[1970-Jan-01 23:41:16.857837]: Setting error code
[1970-Jan-01 23:41:20.920454]: ChangeExtruderProcess: Transitioned to state: 2
[1970-Jan-01 23:42:53.920256]: BotModel::stateNotification
[1970-Jan-01 23:42:53.991608]: PrintProcess state change: 25
[1970-Jan-01 23:42:53.994054]: ChangeExtruderProcess: Transitioned to state: 3
[1970-Jan-01 23:42:54.421333]: BotModel::stateNotification
[1970-Jan-01 23:42:54.492432]: PrintProcess state change: 18
[1970-Jan-01 23:42:54.495939]: ChangeExtruderProcess: Transitioned to state: 4
[1970-Jan-01 23:42:57.215891]: ChangeExtruderProcess: Transitioned to state: 0
[1970-Jan-01 23:42:57.235710]: print monitor shown
[1970-Jan-02 00:08:42.894129]: print monitor shown
[1970-Jan-02 00:08:43.166037]: BotModel::stateNotification
[1970-Jan-02 00:08:43.260665]: PrintProcess state change: 15
[1970-Jan-02 00:08:43.314844]: print monitor shown
[1970-Jan-02 00:08:46.564429]: BotModel::stateNotification
[1970-Jan-02 00:08:46.656520]: PrintProcess state change: 29
[1970-Jan-02 00:08:46.665960]: print monitor shown
[1970-Jan-02 00:08:58.649404]: BotModel::stateNotification
[1970-Jan-02 00:08:58.733410]: PrintProcess state change: 31
[1970-Jan-02 00:08:58.742715]: print monitor shown
[1970-Jan-02 00:08:58.745580]: PrintProcess state change: 0
[1970-Jan-02 00:08:58.854693]: BotModel::stateNotification
[1970-Jan-02 00:09:03.926026]: print monitor shown
[1970-Jan-02 00:09:03.935109]: print monitor shown
[1970-Jan-02 00:09:03.943621]: print monitor shown
[1970-Jan-02 00:09:03.952036]: print monitor shown
[1970-Jan-02 00:09:03.968929]: print monitor shown
[1970-Jan-02 00:09:03.978141]: print monitor shown
[1970-Jan-02 00:09:03.987376]: print monitor shown
[1970-Jan-02 00:09:04.005820]: print monitor shown
[1970-Jan-02 00:09:04.015284]: print monitor shown
[1970-Jan-02 00:09:04.024588]: print monitor shown
[1970-Jan-02 00:09:04.033459]: print monitor shown
[1970-Jan-02 00:09:04.042011]: print monitor shown
[1970-Jan-02 00:09:04.057825]: print monitor shown
[1970-Jan-02 00:09:04.067074]: print monitor shown
[1970-Jan-02 00:09:04.091294]: print monitor shown
[1970-Jan-02 00:09:04.099553]: print monitor shown
[1970-Jan-02 00:09:04.155038]: print monitor shown
[1970-Jan-02 00:09:08.707911]: BotModel::stateNotification
[1970-Jan-02 00:09:08.788202]: load standard step change: running
[1970-Jan-02 00:09:10.249330]: BotModel::stateNotification
[1970-Jan-02 00:09:10.338567]: load standard step change: preheating
[1970-Jan-02 00:12:09.640327]: BotModel::stateNotification
[1970-Jan-02 00:12:09.728121]: load standard step change: extrusion
[1970-Jan-02 00:12:49.125505]: BotModel::stateNotification
[1970-Jan-02 00:12:49.199418]: load standard step change: cancelling
[1970-Jan-02 00:12:49.544585]: BotModel::stateNotification
[1970-Jan-02 00:12:49.622901]: load standard step change: cleaning_up
[1970-Jan-02 00:12:50.069868]: BotModel::stateNotification
[1970-Jan-02 00:12:50.117797]: load standard step change: done
[1970-Jan-02 00:12:50.119990]: load filament cancelled
[1970-Jan-02 00:12:50.267188]: BotModel::stateNotification
[1970-Jan-02 00:12:54.332741]: BotModel::stateNotification
[1970-Jan-02 00:12:54.548480]: BotModel::stateNotification
[1970-Jan-02 00:12:54.647618]: BotModel::stateNotification
[1970-Jan-02 00:12:54.793149]: BotModel::stateNotification
[1970-Jan-02 00:13:05.050765]: BotModel::stateNotification
[1970-Jan-02 00:13:05.273644]: BotModel::stateNotification
[1970-Jan-02 00:13:05.380280]: BotModel::stateNotification
[1970-Jan-02 00:13:05.491933]: BotModel::stateNotification
[1970-Jan-02 00:13:24.032168]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 00:13:24.070730]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 00:13:24.168227]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 00:13:24.174800]: (UDEV Monitor): Transitioned to state: 1
[1970-Jan-02 00:13:25.118240]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 00:13:25.189694]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 00:13:27.902362]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 00:13:29.130917]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 00:13:29.156986]: (UDEV Monitor): Transitioned to state: 2
[1970-Jan-02 00:13:39.403420]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 00:13:39.420362]: (UDEV Monitor): Transitioned to state: 0
[1970-Jan-02 00:13:39.514361]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 00:13:39.603458]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 00:13:39.703880]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 00:13:39.803439]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 00:13:39.920779]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 00:13:40.003900]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:38:43.795517]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:38:43.892790]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:38:44.021217]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:38:44.027566]: (UDEV Monitor): Transitioned to state: 1
[1970-Jan-02 21:38:44.841171]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:38:44.892762]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:38:47.992868]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:38:49.198106]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:38:49.224779]: (UDEV Monitor): Transitioned to state: 2
[1970-Jan-02 21:39:23.237329]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:23.245952]: (UDEV Monitor): Transitioned to state: 0
[1970-Jan-02 21:39:23.337270]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:23.437342]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:23.582741]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:23.637230]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:23.737165]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:23.845605]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:25.537251]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:25.637223]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:25.737262]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:25.745428]: (UDEV Monitor): Transitioned to state: 1
[1970-Jan-02 21:39:26.637308]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:26.651871]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:29.620641]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:30.838526]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:30.862926]: (UDEV Monitor): Transitioned to state: 2
[1970-Jan-02 21:39:47.409133]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:47.427258]: (UDEV Monitor): Transitioned to state: 0
[1970-Jan-02 21:39:47.480565]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:47.580542]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:47.680561]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:47.800270]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:47.880609]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:39:48.021525]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:41:54.780571]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:41:54.880577]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:41:54.980627]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:41:54.986882]: (UDEV Monitor): Transitioned to state: 1
[1970-Jan-02 21:41:55.780822]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:41:55.880719]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:41:58.980583]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:42:00.280532]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:42:00.296908]: (UDEV Monitor): Transitioned to state: 2
[1970-Jan-02 21:42:12.644502]: FilePrintDialog::startPrintClicked()
[1970-Jan-02 21:42:13.381415]: PrintProcess state change: 1
[1970-Jan-02 21:42:14.053089]: print monitor shown
[1970-Jan-02 21:42:14.169169]: BotModel::stateNotification
[1970-Jan-02 21:42:14.289583]: built from filename
[1970-Jan-02 21:42:18.117630]: BotModel::stateNotification
[1970-Jan-02 21:42:18.204439]: PrintProcess state change: 6
[1970-Jan-02 21:42:18.273869]: print monitor shown
[1970-Jan-02 21:42:42.850214]: BotModel::stateNotification
[1970-Jan-02 21:42:42.942850]: PrintProcess state change: 9
[1970-Jan-02 21:42:43.031180]: print monitor shown
[1970-Jan-02 21:43:11.690857]: BotModel::stateNotification
[1970-Jan-02 21:43:11.769878]: PrintProcess state change: 7
[1970-Jan-02 21:43:11.843609]: print monitor shown
[1970-Jan-02 21:45:35.029260]: BotModel::stateNotification
[1970-Jan-02 21:45:35.100521]: PrintProcess state change: 13
[1970-Jan-02 21:45:35.130768]: print monitor shown
[1970-Jan-02 21:50:29.497199]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:50:29.506942]: (UDEV Monitor): Transitioned to state: 0
[1970-Jan-02 21:50:29.794403]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:50:29.867944]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:50:29.967830]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:50:30.067797]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:50:30.179497]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 21:58:32.867527]: BotModel::stateNotification
[1970-Jan-02 21:58:32.955585]: PrintProcess state change: 14
[1970-Jan-02 21:58:32.979023]: print monitor shown
[1970-Jan-02 21:58:32.992803]: BotModel::stateNotification
[1970-Jan-02 21:58:33.073766]: PrintProcess state change: 29
[1970-Jan-02 21:58:33.188385]: print monitor shown
[1970-Jan-02 21:58:45.765417]: BotModel::stateNotification
[1970-Jan-02 21:58:45.860568]: PrintProcess state change: 30
[1970-Jan-02 21:58:45.881418]: print monitor shown
[1970-Jan-02 22:04:34.017025]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 22:04:34.144722]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 22:04:34.273644]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 22:04:34.290319]: (UDEV Monitor): Transitioned to state: 1
[1970-Jan-02 22:04:35.837290]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 22:04:35.981997]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 22:04:36.145746]: print monitor shown
[1970-Jan-02 22:04:36.159291]: print monitor shown
[1970-Jan-02 22:04:36.191006]: print monitor shown
[1970-Jan-02 22:04:36.211328]: print monitor shown
[1970-Jan-02 22:04:36.232460]: print monitor shown
[1970-Jan-02 22:04:36.254211]: print monitor shown
[1970-Jan-02 22:04:36.285178]: print monitor shown
[1970-Jan-02 22:04:36.588604]: BotModel::stateNotification
[1970-Jan-02 22:04:36.665205]: PrintProcess state change: 31
[1970-Jan-02 22:04:36.696074]: print monitor shown
[1970-Jan-02 22:04:36.698105]: PrintProcess state change: 0
[1970-Jan-02 22:04:36.756463]: BotModel::stateNotification
[1970-Jan-02 22:04:39.562233]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 22:04:42.161448]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 22:04:42.184265]: (UDEV Monitor): Transitioned to state: 2
[1970-Jan-02 22:04:46.867903]: print monitor shown
[1970-Jan-02 22:05:27.254172]: FilePrintDialog::startPrintClicked()
[1970-Jan-02 22:05:27.582667]: PrintProcess state change: 1
[1970-Jan-02 22:05:28.205954]: print monitor shown
[1970-Jan-02 22:05:28.442356]: BotModel::stateNotification
[1970-Jan-02 22:05:28.543861]: built from filename
[1970-Jan-02 22:05:29.954360]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 22:05:34.106399]: BotModel::stateNotification
[1970-Jan-02 22:05:34.146013]: PrintProcess state change: 6
[1970-Jan-02 22:05:34.189547]: print monitor shown
[1970-Jan-02 22:05:58.899350]: BotModel::stateNotification
[1970-Jan-02 22:05:58.985984]: PrintProcess state change: 9
[1970-Jan-02 22:05:59.067345]: print monitor shown
[1970-Jan-02 22:06:28.918128]: BotModel::stateNotification
[1970-Jan-02 22:06:29.013089]: PrintProcess state change: 7
[1970-Jan-02 22:06:29.080656]: print monitor shown
[1970-Jan-02 22:08:32.311327]: BotModel::stateNotification
[1970-Jan-02 22:08:32.398360]: PrintProcess state change: 13
[1970-Jan-02 22:08:32.444280]: print monitor shown
[1970-Jan-02 22:24:40.948593]: BotModel::stateNotification
[1970-Jan-02 22:24:41.043146]: PrintProcess state change: 14
[1970-Jan-02 22:24:41.062384]: print monitor shown
[1970-Jan-02 22:24:41.224562]: BotModel::stateNotification
[1970-Jan-02 22:24:41.295781]: PrintProcess state change: 29
[1970-Jan-02 22:24:41.388805]: print monitor shown
[1970-Jan-02 22:24:55.524149]: BotModel::stateNotification
[1970-Jan-02 22:24:55.612879]: PrintProcess state change: 30
[1970-Jan-02 22:24:55.633182]: print monitor shown
[1970-Jan-02 22:25:49.354478]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 22:25:49.387865]: (UDEV Monitor): Transitioned to state: 0
[1970-Jan-02 22:25:49.510929]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 22:25:49.643124]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 22:25:49.776317]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 22:25:49.821650]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 22:25:50.017219]: (UDEV Monitor): select() says there should be data
[1970-Jan-02 22:29:16.182999]: print monitor shown
[1970-Jan-02 22:29:16.202480]: print monitor shown
[1970-Jan-02 22:29:16.221223]: print monitor shown
[1970-Jan-02 22:29:16.229398]: print monitor shown
[1970-Jan-02 22:29:16.249122]: print monitor shown
[1970-Jan-02 22:29:16.277397]: print monitor shown
[1970-Jan-02 22:29:16.296148]: print monitor shown
[1970-Jan-02 22:29:16.602757]: BotModel::stateNotification
[1970-Jan-02 22:29:16.681910]: PrintProcess state change: 31
[1970-Jan-02 22:29:16.701324]: print monitor shown
[1970-Jan-02 22:29:16.703332]: PrintProcess state change: 0
[1970-Jan-02 22:29:16.770260]: BotModel::stateNotification
[1970-Jan-02 22:29:18.363342]: print monitor shown
[1970-Jan-02 22:29:37.174416]: BotModel::stateNotification
[1970-Jan-02 22:29:38.514217]: BotModel::stateNotification
[1970-Jan-02 22:32:04.708428]: BotModel::stateNotification
[1970-Jan-02 22:32:22.403057]: BotModel::stateNotification
[1970-Jan-02 22:32:22.486715]: BotModel::stateNotification
[1970-Jan-02 22:32:22.865187]: BotModel::stateNotification
[1970-Jan-02 22:33:00.340814]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-02 22:33:02.029491]: BotModel::stateNotification
[1970-Jan-02 22:33:02.294387]: BotModel::stateNotification
[1970-Jan-02 22:33:02.386559]: BotModel::stateNotification
[1970-Jan-02 22:33:02.430542]: BotModel::stateNotification
[1970-Jan-06 20:45:54.951742]: BotModel::stateNotification
[1970-Jan-06 20:45:56.161229]: load standard step change: running
[1970-Jan-06 20:45:56.306896]: BotModel::stateNotification
[1970-Jan-06 20:45:56.385622]: load standard step change: preheating
[1970-Jan-06 20:48:57.290562]: BotModel::stateNotification
[1970-Jan-06 20:48:57.352082]: load standard step change: extrusion
[1970-Jan-06 20:49:49.820270]: BotModel::stateNotification
[1970-Jan-06 20:49:49.912108]: load standard step change: cleaning_up
[1970-Jan-06 20:49:50.347886]: BotModel::stateNotification
[1970-Jan-06 20:49:50.419885]: load standard step change: done
[1970-Jan-06 20:49:50.422019]: load filament completed
[1970-Jan-06 20:49:50.492729]: BotModel::stateNotification
[1970-Jan-06 20:49:55.396796]: BotModel::stateNotification
[1970-Jan-06 20:49:55.487339]: load standard step change: running
[1970-Jan-06 20:49:56.727820]: BotModel::stateNotification
[1970-Jan-06 20:49:56.816704]: load standard step change: preheating
[1970-Jan-06 20:50:08.229343]: BotModel::stateNotification
[1970-Jan-06 20:50:08.319938]: load standard step change: extrusion
[1970-Jan-06 20:50:47.247830]: BotModel::stateNotification
[1970-Jan-06 20:50:47.327187]: load standard step change: cancelling
[1970-Jan-06 20:50:49.189359]: BotModel::stateNotification
[1970-Jan-06 20:50:49.280662]: load standard step change: cleaning_up
[1970-Jan-06 20:50:49.807880]: BotModel::stateNotification
[1970-Jan-06 20:50:49.888404]: load standard step change: done
[1970-Jan-06 20:50:49.890691]: load filament cancelled
[1970-Jan-06 20:50:50.407552]: BotModel::stateNotification
[1970-Jan-06 20:51:03.390611]: BotModel::stateNotification
[1970-Jan-06 20:51:03.629660]: BotModel::stateNotification
[1970-Jan-06 20:51:03.729223]: BotModel::stateNotification
[1970-Jan-06 20:51:03.786129]: BotModel::stateNotification
[1970-Jan-06 20:51:39.644604]: (UDEV Monitor): select() says there should be data
[1970-Jan-06 20:51:39.746013]: (UDEV Monitor): select() says there should be data
[1970-Jan-06 20:51:39.844593]: (UDEV Monitor): select() says there should be data
[1970-Jan-06 20:51:39.861685]: (UDEV Monitor): Transitioned to state: 1
[1970-Jan-06 20:51:40.644674]: (UDEV Monitor): select() says there should be data
[1970-Jan-06 20:51:40.840790]: (UDEV Monitor): select() says there should be data
[1970-Jan-06 20:51:43.762104]: (UDEV Monitor): select() says there should be data
[1970-Jan-06 20:51:45.745567]: (UDEV Monitor): select() says there should be data
[1970-Jan-06 20:51:45.776984]: (UDEV Monitor): Transitioned to state: 2
[1970-Jan-06 20:52:19.283388]: FilePrintDialog::startPrintClicked()
[1970-Jan-06 20:52:19.784428]: PrintProcess state change: 1
[1970-Jan-06 20:52:20.424497]: print monitor shown
[1970-Jan-06 20:52:20.677518]: BotModel::stateNotification
[1970-Jan-06 20:52:20.778858]: built from filename
[1970-Jan-06 20:52:22.177374]: (UDEV Monitor): select() says there should be data
[1970-Jan-06 20:52:24.128670]: BotModel::stateNotification
[1970-Jan-06 20:52:24.217619]: PrintProcess state change: 6
[1970-Jan-06 20:52:24.356699]: print monitor shown
[1970-Jan-06 20:52:48.459711]: BotModel::stateNotification
[1970-Jan-06 20:52:48.548055]: PrintProcess state change: 9
[1970-Jan-06 20:52:48.637571]: print monitor shown
[1970-Jan-06 20:53:16.480941]: BotModel::stateNotification
[1970-Jan-06 20:53:16.567265]: PrintProcess state change: 8
[1970-Jan-06 20:53:16.645206]: print monitor shown
[1970-Jan-06 20:53:18.688666]: BotModel::stateNotification
[1970-Jan-06 20:53:18.780873]: PrintProcess state change: 7
[1970-Jan-06 20:53:18.861415]: print monitor shown
[1970-Jan-06 20:54:21.370601]: BotModel::stateNotification
[1970-Jan-06 20:54:21.457000]: PrintProcess state change: 13
[1970-Jan-06 20:54:21.508077]: print monitor shown
[1970-Jan-06 20:54:29.676168]: (UDEV Monitor): select() says there should be data
[1970-Jan-06 20:54:29.693938]: (UDEV Monitor): Transitioned to state: 0
[1970-Jan-06 20:54:29.776404]: (UDEV Monitor): select() says there should be data
[1970-Jan-06 20:54:29.876153]: (UDEV Monitor): select() says there should be data
[1970-Jan-06 20:54:29.976146]: (UDEV Monitor): select() says there should be data
[1970-Jan-06 20:54:30.076099]: (UDEV Monitor): select() says there should be data
[1970-Jan-06 20:54:30.176088]: (UDEV Monitor): select() says there should be data
[1970-Jan-06 21:06:32.088456]: BotModel::stateNotification
[1970-Jan-06 21:06:32.178176]: PrintProcess state change: 14
[1970-Jan-06 21:06:32.220244]: print monitor shown
[1970-Jan-06 21:06:32.364544]: BotModel::stateNotification
[1970-Jan-06 21:06:32.471674]: PrintProcess state change: 29
[1970-Jan-06 21:06:32.555051]: print monitor shown
[1970-Jan-06 21:06:46.651650]: BotModel::stateNotification
[1970-Jan-06 21:06:46.744265]: PrintProcess state change: 30
[1970-Jan-06 21:06:46.764107]: print monitor shown
[1970-Jan-07 19:00:13.360695]: print monitor shown
[1970-Jan-07 19:00:13.369813]: print monitor shown
[1970-Jan-07 19:00:13.387805]: print monitor shown
[1970-Jan-07 19:00:13.426192]: print monitor shown
[1970-Jan-07 19:00:13.436878]: print monitor shown
[1970-Jan-07 19:00:13.466413]: print monitor shown
[1970-Jan-07 19:00:13.485404]: print monitor shown
[1970-Jan-07 19:00:13.504242]: print monitor shown
[1970-Jan-07 19:00:13.814099]: BotModel::stateNotification
[1970-Jan-07 19:00:13.871939]: PrintProcess state change: 31
[1970-Jan-07 19:00:13.901051]: print monitor shown
[1970-Jan-07 19:00:13.903052]: PrintProcess state change: 0
[1970-Jan-07 19:00:13.966462]: BotModel::stateNotification
[1970-Jan-07 23:03:46.380348]: print monitor shown
[1970-Jan-07 23:03:58.087513]: BotModel::stateNotification
[1970-Jan-07 23:03:59.456158]: BotModel::stateNotification
[1970-Jan-07 23:06:58.959916]: BotModel::stateNotification
[1970-Jan-07 23:07:16.365160]: BotModel::stateNotification
[1970-Jan-07 23:07:16.669538]: BotModel::stateNotification
[1970-Jan-07 23:07:16.978371]: BotModel::stateNotification
[1970-Jan-09 21:30:05.753877]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-09 21:30:10.393822]: BotModel::stateNotification
[1970-Jan-09 21:30:10.481712]: load standard step change: running
[1970-Jan-09 21:30:11.731021]: BotModel::stateNotification
[1970-Jan-09 21:30:11.803252]: load standard step change: preheating
[1970-Jan-09 21:30:25.550803]: BotModel::stateNotification
[1970-Jan-09 21:30:25.648337]: load standard step change: cancelling
[1970-Jan-09 21:30:25.661131]: BotModel::stateNotification
[1970-Jan-09 21:30:25.734262]: load standard step change: cleaning_up
[1970-Jan-09 21:30:25.934143]: BotModel::stateNotification
[1970-Jan-09 21:30:26.007248]: load standard step change: done
[1970-Jan-09 21:30:26.010230]: load filament cancelled
[1970-Jan-09 21:30:26.164207]: BotModel::stateNotification
[1970-Jan-09 21:30:28.565936]: BotModel::stateNotification
[1970-Jan-09 21:30:29.907839]: BotModel::stateNotification
[1970-Jan-09 21:33:07.648137]: BotModel::stateNotification
[1970-Jan-09 21:33:25.070434]: BotModel::stateNotification
[1970-Jan-09 21:33:25.823698]: BotModel::stateNotification
[1970-Jan-09 21:33:26.136606]: BotModel::stateNotification
[1970-Jan-09 21:34:23.111807]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-09 21:34:28.322182]: BotModel::stateNotification
[1970-Jan-09 21:34:28.408312]: load standard step change: running
[1970-Jan-09 21:34:29.690632]: BotModel::stateNotification
[1970-Jan-09 21:34:29.778064]: load standard step change: preheating
[1970-Jan-09 21:34:30.793543]: BotModel::stateNotification
[1970-Jan-09 21:34:30.842976]: load standard step change: extrusion
[1970-Jan-09 21:34:49.740924]: BotModel::stateNotification
[1970-Jan-09 21:34:49.815497]: load standard step change: cancelling
[1970-Jan-09 21:34:51.672476]: BotModel::stateNotification
[1970-Jan-09 21:34:51.759129]: load standard step change: cleaning_up
[1970-Jan-09 21:34:52.354442]: BotModel::stateNotification
[1970-Jan-09 21:34:52.411603]: load standard step change: done
[1970-Jan-09 21:34:52.413917]: load filament cancelled
[1970-Jan-09 21:34:52.540451]: BotModel::stateNotification
[1970-Jan-09 21:34:54.814412]: BotModel::stateNotification
[1970-Jan-09 21:34:55.058683]: BotModel::stateNotification
[1970-Jan-09 21:34:55.155860]: BotModel::stateNotification
[1970-Jan-09 21:34:55.223684]: BotModel::stateNotification
[1970-Jan-09 21:34:57.039667]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:34:57.161096]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:34:57.239675]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:34:57.246358]: (UDEV Monitor): Transitioned to state: 1
[1970-Jan-09 21:34:58.058398]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:34:58.189270]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:35:01.039681]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:35:02.439691]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:35:02.472908]: (UDEV Monitor): Transitioned to state: 2
[1970-Jan-09 21:35:12.758830]: FilePrintDialog::startPrintClicked()
[1970-Jan-09 21:35:13.141305]: PrintProcess state change: 1
[1970-Jan-09 21:35:13.759051]: print monitor shown
[1970-Jan-09 21:35:13.986650]: BotModel::stateNotification
[1970-Jan-09 21:35:14.097801]: built from filename
[1970-Jan-09 21:35:15.466653]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:35:17.592430]: BotModel::stateNotification
[1970-Jan-09 21:35:17.682196]: PrintProcess state change: 8
[1970-Jan-09 21:35:17.755945]: print monitor shown
[1970-Jan-09 21:35:42.809113]: BotModel::stateNotification
[1970-Jan-09 21:35:42.887604]: PrintProcess state change: 9
[1970-Jan-09 21:35:42.978059]: print monitor shown
[1970-Jan-09 21:36:10.833142]: BotModel::stateNotification
[1970-Jan-09 21:36:10.910854]: PrintProcess state change: 7
[1970-Jan-09 21:36:10.985195]: print monitor shown
[1970-Jan-09 21:37:28.082315]: BotModel::stateNotification
[1970-Jan-09 21:37:28.181239]: PrintProcess state change: 13
[1970-Jan-09 21:37:29.354588]: print monitor shown
[1970-Jan-09 21:52:33.209833]: BotModel::stateNotification
[1970-Jan-09 21:52:33.297068]: PrintProcess state change: 14
[1970-Jan-09 21:52:33.316492]: print monitor shown
[1970-Jan-09 21:52:33.466408]: BotModel::stateNotification
[1970-Jan-09 21:52:33.556774]: PrintProcess state change: 29
[1970-Jan-09 21:52:33.636718]: print monitor shown
[1970-Jan-09 21:52:47.555352]: BotModel::stateNotification
[1970-Jan-09 21:52:47.643117]: PrintProcess state change: 30
[1970-Jan-09 21:52:47.664215]: print monitor shown
[1970-Jan-09 21:54:30.909235]: print monitor shown
[1970-Jan-09 21:54:30.919499]: print monitor shown
[1970-Jan-09 21:54:30.938040]: print monitor shown
[1970-Jan-09 21:54:30.966624]: print monitor shown
[1970-Jan-09 21:54:30.985036]: print monitor shown
[1970-Jan-09 21:54:31.014103]: print monitor shown
[1970-Jan-09 21:54:31.032689]: print monitor shown
[1970-Jan-09 21:54:31.306490]: BotModel::stateNotification
[1970-Jan-09 21:54:31.387973]: PrintProcess state change: 31
[1970-Jan-09 21:54:31.411158]: print monitor shown
[1970-Jan-09 21:54:31.413298]: PrintProcess state change: 0
[1970-Jan-09 21:54:31.477238]: BotModel::stateNotification
[1970-Jan-09 21:54:34.594679]: print monitor shown
[1970-Jan-09 21:54:38.720729]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:54:38.728168]: (UDEV Monitor): Transitioned to state: 0
[1970-Jan-09 21:54:38.864500]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:54:38.930743]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:54:39.030863]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:54:39.120568]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:54:39.220674]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:54:48.220609]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:54:48.320575]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:54:48.420565]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:54:48.427089]: (UDEV Monitor): Transitioned to state: 1
[1970-Jan-09 21:54:50.020622]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:54:50.120577]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:54:53.720757]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:54:56.320680]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:54:56.345737]: (UDEV Monitor): Transitioned to state: 2
[1970-Jan-09 21:55:37.439235]: FilePrintDialog::startPrintClicked()
[1970-Jan-09 21:55:37.846157]: PrintProcess state change: 1
[1970-Jan-09 21:55:39.199727]: print monitor shown
[1970-Jan-09 21:55:39.562566]: BotModel::stateNotification
[1970-Jan-09 21:55:39.663746]: built from filename
[1970-Jan-09 21:55:41.016038]: (UDEV Monitor): select() says there should be data
[1970-Jan-09 21:56:04.119860]: BotModel::stateNotification
[1970-Jan-09 21:56:04.213214]: PrintProcess state change: 6
[1970-Jan-09 21:56:04.288653]: print monitor shown
[1970-Jan-09 21:56:29.501749]: BotModel::stateNotification
[1970-Jan-09 21:56:29.588256]: PrintProcess state change: 9
[1970-Jan-09 21:56:29.682325]: print monitor shown
[1970-Jan-09 21:56:59.735923]: BotModel::stateNotification
[1970-Jan-09 21:56:59.815276]: PrintProcess state change: 7
[1970-Jan-09 21:56:59.892259]: print monitor shown
[1970-Jan-09 21:58:27.759829]: BotModel::stateNotification
[1970-Jan-09 21:58:27.854611]: PrintProcess state change: 13
[1970-Jan-09 21:58:27.905013]: print monitor shown
[1970-Jan-10 01:14:18.707934]: BotModel::stateNotification
[1970-Jan-10 01:14:18.792282]: PrintProcess state change: 14
[1970-Jan-10 01:14:18.811561]: print monitor shown
[1970-Jan-10 01:14:18.969041]: BotModel::stateNotification
[1970-Jan-10 01:14:19.049418]: PrintProcess state change: 29
[1970-Jan-10 01:14:19.145122]: print monitor shown
[1970-Jan-10 01:14:29.994333]: BotModel::stateNotification
[1970-Jan-10 01:14:30.072067]: PrintProcess state change: 30
[1970-Jan-10 01:14:30.095049]: print monitor shown
[1970-Jan-10 01:21:33.464798]: (UDEV Monitor): select() says there should be data
[1970-Jan-10 01:21:33.482907]: (UDEV Monitor): Transitioned to state: 0
[1970-Jan-10 01:21:33.702566]: (UDEV Monitor): select() says there should be data
[1970-Jan-10 01:21:33.827524]: (UDEV Monitor): select() says there should be data
[1970-Jan-10 01:21:33.963151]: (UDEV Monitor): select() says there should be data
[1970-Jan-10 01:21:34.003067]: (UDEV Monitor): select() says there should be data
[1970-Jan-10 01:21:34.103744]: (UDEV Monitor): select() says there should be data
[1970-Jan-10 01:24:01.608905]: print monitor shown
[1970-Jan-10 01:24:01.628825]: print monitor shown
[1970-Jan-10 01:24:01.654411]: print monitor shown
[1970-Jan-10 01:24:01.673219]: print monitor shown
[1970-Jan-10 01:24:01.688047]: print monitor shown
[1970-Jan-10 01:24:01.696536]: print monitor shown
[1970-Jan-10 01:24:01.715223]: print monitor shown
[1970-Jan-10 01:24:02.009602]: BotModel::stateNotification
[1970-Jan-10 01:24:02.095120]: PrintProcess state change: 31
[1970-Jan-10 01:24:02.134939]: print monitor shown
[1970-Jan-10 01:24:02.137137]: PrintProcess state change: 0
[1970-Jan-10 01:24:02.207620]: BotModel::stateNotification
[1970-Jan-10 01:24:16.209388]: print monitor shown
[1970-Jan-10 01:24:30.743276]: DeauthAccountsPanel::setAccountNum(2) stage: 0
[1970-Jan-10 01:24:37.182501]: DeauthAccountsPanel::setAccountNum(2) stage: 0